Pneumatic Vacuum Conveyor for Granulator

Model NO.: QVC-4
Qvc-2 Feeding Volume: 700kg
Qvc-3 Feeding Volume: 1500kg
Qvc-4 Feeding Volume: 3000kg
Qvc-5 Feeding Volume: 6000kg
Qvc-6 Feeding Volume: 9000kg
Trademark: BSIT
Specification: meet with GMP standards
Origin: Made in China
HS Code: 843880000
Working principle:
Vacuum feeder is a vacuum feeding machine by using pneumatic vacuum pump as vacuum source, with this vacuum feeder materials could be directly from container to mixer, reactor, hopper, sheet press, packing machine, vibrating griddle, pellet trimming machine, hydro-state palter, dry-state pellet disintegrator. To use this feeder could lighten workers labor intensity, put an end to powder pollution and ensure the at production process meets GMP requirements.
When "ON/OFF" key is pressed, compressed air gets into vacuum pump and the discharge of the hopper. Driven by Pneumatic cylinder. Is closed. Vacuum is stabled in hopper. Vacuum feeder will form an air current under vacuum. Operated by this current, material is fed to vacuum hopper via hose. After a period of time( feeding time, adjustable). Compressed air is cut off, pneumatic vacuum pump could not generate vacuum and the discharge of the hopper. Driven by pneumatic cylinder, gets open the vacuum in vacuum feeder disappear and material is automatically discharged from the discharge into receiving machine( such as sheet press and packing machine). Meanwhile, compressed air stored in the air of time( discharge time, adjustable). Compressed air is restarted, Pneumatic vacuum pump generated vacuum, discharge is closed. Vacuum feeder feeding material again. In this way the feeder works in cycles to make the material fed into receiving machine continuously.
For the vacuum feeder with material level control automatic feeding is realized with the hopper of the material-receiving machine through materials level control. When the material level is higher than a position in the hopper to the material receiving.
Technical Specification:
Model
Feeding volume
(kg/h)

Air consumption
( Liter/minute)

Pressure of supplied air ( MPA)

QVC-1

350KG

180L

0.5-0.6

QVC-2

700KG

360L

0.5-0.6

QVC-3

1500KG

720L

0.5-0.6

QVC-4

3000KG

1440L

0.5-0.6

QVC-5

6000KG

2880L

0.5-0.6

QVC-6

9000KG

4320L

0.5-0.6

Low Pressure Casting Machine is a combination of our years of low pressure casting design experience, after careful design, precision manufacturing. The machine adopts imported famous brand products in hydraulic, electrical and cooling control systems, which fundamentally guarantees the reliability and stability of the equipment.

This machine is mainly used to produce aluminium alloy castings for automobiles and motorcycles, especially for cylinder heads and other parts.

Low Pressure Die Casting Machine

Low Pressure Casting Machine,Low Pressure Die Casting Machine,Aluminium Die Casting Machine,Aluminum Alloy Casting Machine

Shandong ShengKaiYuan Intelligent Technology Co.Ltd , https://www.cncastmachine.com

This entry was posted in on